Cold-applied, water-based bitumen emulsion paste in blue and red, supplied in 15 kg pails. Used as a primer under torch-applied membrane and as a waterproofing coat in its own right.
Specification
- Ready-to-use bitumen emulsion, produced by emulsifying bitumen in water
- Supplied in two colours, blue and red
- 15 kg pails
- Cold applied by brush or dispenser
- Drying time 4 to 5 hours
- Apply above +5 °C and never in rain
Physical and chemical indicators
Bitumen emulsion paste — cold applied liquid waterproofing
| Parameter | Norm |
|---|
| Base | Water-based bitumen emulsion |
| Colours | Blue, red |
| Packing | 15 kg pail |
| Application | Brush or dispenser, cold |
| Drying time | 4–5 hours |
| Minimum application temperature | +5 °C |
Properties
- Water-based and environmentally friendly, with no solvent
- Adheres well even to damp substrates
- Doubles as the primer for TM and Orko torch-applied membranes
Applications
Water tanks, swimming pools, bathrooms and wet rooms, roofs, car parks and retaining walls. Also the standard primer coat before laying bitumen membrane.
Surface preparation
Clean the surface of dust, dirt, rust and oil. Round off sharp corners and fill cracks with repair mortar before coating.
Loading and delivery
EXW Ashgabat. Pails are palletised and stretch-wrapped. State the colour with the enquiry. The producer exports to Turkey, Russia, Kazakhstan, Uzbekistan, Azerbaijan, Tajikistan, Kyrgyzstan, the UAE, Europe and the USA.